Workshop storage you can 3D print: Skadis, pegboard and wall mounts
Pegboard parts live or die by two numbers: the hole or slot size and the board thickness. IKEA Skadis boards have 5 x 15 mm slots on a 40 mm grid and are about 5 mm thick; classic pegboard has 1/4 inch (6.35 mm) holes on a 1 inch (25.4 mm) grid in 1/8 or 1/4 inch board. Each design here sets those as sliders with the gap it leaves, and the proof panel shows the values measured on the model.
Print hooks and holders on their side so the layers run along the arm that carries the load, and use PETG or 4 or more walls for anything heavy. Before you print a batch, print one and try it on your own board: boards vary by a few tenths of a millimetre.
Skadis hook
One-piece hook for the IKEA Skadis pegboard: set the depth and the cup, print it on its side.
Skadis screwdriver holder
Shelf for IKEA Skadis with 6 screwdriver holes of 12 mm on two hooks, sized in the browser.
Pegboard hook
Pegboard hook with a hooked upper peg that catches behind the board, a 50 mm arm and a 12 mm lip.
Battery wall mount
Slide-on 18 V battery holder with two rails, a bottom stop and 2 countersunk screw holes.
Designed with buildcad's AI agent, checked by the buildcad team.